Avid DS (which was called Avid DS Nitris until early 2008) is a high-end offline and finishing system comprising a non-linear editing system and visual effects software. It was developed by Softimage (this company was owned by Microsoft at the time of DS v1.0's launch before being acquired from Microsoft by Avid Technology, Inc. shortly thereafter) in Montreal. DS was discontinued on September 30, 2013 with support ending on the same date the following year. == Software == DS was called ‘Digital Studio’ in development. It was envisioned to be a complete platform for video/audio work. The first previews of the system were on the SGI platform, but this version was never released. The system was rewritten on Windows NT with different video hardware platforms (Matrox DigiSuite or Play Trinity running on a NetPower system) before the final system was released on Intergraph/StudioZ hardware in January 1998. After its acquisition by Avid, DS was always positioned as a high end video finishing tool. However, many users found it to be uniquely soup-to-nuts in its capabilities. From version 1.0 of the product, it competed with products like Autodesk Smoke, Quantel and Avid Symphony. The toolset in DS offered video timeline editing, an object-oriented vector-based paint tool, 2D layer compositing, sample based audio and starting with version 3.01 of the product, a 3D environment. Originally, a subset of the Softimage|XSI 3D software was planned to become part of the DS toolset, both were built on the same software foundation, but over time the code bases divided between the applications and the integration never happened. While the first version of the DS still lacked a few key features (no 3D, poor keying, no real-time effects), it had some significant features compared to the competing products at the time. It offered a large number of built in effects. Avid OMF import was available, positioning Softimage DS as a strong finishing tool for then typical off-line Avid systems. Lastly the integration of the toolset of Softimage DS was beyond what other product offered. A Softimage DS user could quickly go from editing, to paint, to compositing with a few mouse clicks all inside the same interface. Some of the lacking features were quickly resolved, within months of version 1.0 a new chroma keyer was released. Early versions of the software (up thru 4.0) added additional key features. Development continued with one of the first uncompressed HD editing systems (version 4.01) and an attempt to make the system more friendly to Media Composer editors in version 6. In later versions (v7.5 on beyond) DS was criticized for slow development of compositing tools, mainly lack of a new 3D environment and better tracking tools. Many DS users felt that Avid had not been giving DS the attention that it deserved. On July 7, 2013, Avid sent out an email marking the end of life of the DS product. "To Our Avid DS customers, We are writing to inform you that Avid will be realigning our business strategy to focus on a core suite of products to best leverage our developmental and creative resources. As part of this transition, we will be ceasing future development of Avid DS with a final sale date of September 30th, 2013" == Hardware == Up until version 10.5, DS was sold as a turn-key system; the software was not available without purchasing CPU, I/O and storage hardware from Avid. Beginning with 10.5, customers were able to configure their own systems using widely available components, based on recommended system requirements. In turn-key systems, there were many hardware refreshes over time. StudioZ single stream: Intergraph TDZ-425 with 30 minutes of uncompressed SCSI storage. CPUs at the time were Pentium II/300 MHz. StudioZ dual stream: Intergraph TDZ-2000 GT1 with one hour of fibre channel storage. CPUs on first systems were Pentium II/400 MHz, but last shipping systems had Pentium III/1 GHz. DS was one of the first applications to show that real-time effects could be processed with just the CPUs of the system, not requiring special video cards with real-time effect hardware. Equinox: Developed by Avid, it was one of the first uncompressed HD video cards available. Systems were available on CPUs from Pentium III/1 GHz to Pentium 4/2.8 GHz. Storage was typically SCSI, but fibre channel was also supported. Nitris DNA: Developed by Avid, the Nitris hardware was probably the largest hardware update to the system since it was released. 10-bit HD and SD support was standard. Real-time down and cross convert. This was the only hardware for DS that had on-board effect processing. This allowed a system at the time to play back dual-stream uncompressed HD effects in real-time at 16-bit precision. This was also the first hardware from Avid to support the DNxHD codec. Starting with Pentium 4, Intel Core Xeons were supported. SCSI storage was primarily used. AJA Video Systems: First available as a 4:4:4 option to be used in conjunction with Nitris hardware. Final-generation DS systems used the AJA Video Systems Kona 3 (Xena 2K) card as the only I/O for the system. The last systems shipped with two Intel Core Xeon 6-core processors. SAS is the recommended storage for these systems. == History ==
MobileNet
MobileNet is a family of convolutional neural network (CNN) architectures designed for image classification, object detection, and other computer vision tasks. They are designed for small size, low latency, and low power consumption, making them suitable for on-device inference and edge computing on resource-constrained devices like mobile phones and embedded systems. They were originally designed to be run efficiently on mobile devices with TensorFlow Lite. The need for efficient deep learning models on mobile devices led researchers at Google to develop MobileNet. As of June 2025, the family has five versions, each improving upon the previous one in terms of performance and efficiency. == Features == === V1 === MobileNetV1 was published in April 2017. Its main architectural innovation was incorporation of depthwise separable convolutions. It was first developed by Laurent Sifre during an internship at Google Brain in 2013 as an architectural variation on AlexNet to improve convergence speed and model size. The depthwise separable convolution decomposes a single standard convolution into two convolutions: a depthwise convolution that filters each input channel independently and a pointwise convolution ( 1 × 1 {\displaystyle 1\times 1} convolution) that combines the outputs of the depthwise convolution. This factorization significantly reduces computational cost. The MobileNetV1 has two hyperparameters: a width multiplier α {\displaystyle \alpha } that controls the number of channels in each layer. Smaller values of α {\displaystyle \alpha } lead to smaller and faster models, but at the cost of reduced accuracy, and a resolution multiplier ρ {\displaystyle \rho } , which controls the input resolution of the images. Lower resolutions result in faster processing but potentially lower accuracy. === V2 === MobileNetV2 was published in March 2019. It uses inverted residual layers and linear bottlenecks. Inverted residuals modify the traditional residual block structure. Instead of compressing the input channels before the depthwise convolution, they expand them. This expansion is followed by a 1 × 1 {\displaystyle 1\times 1} depthwise convolution and then a 1 × 1 {\displaystyle 1\times 1} projection layer that reduces the number of channels back down. This inverted structure helps to maintain representational capacity by allowing the depthwise convolution to operate on a higher-dimensional feature space, thus preserving more information flow during the convolutional process. Linear bottlenecks removes the typical ReLU activation function in the projection layers. This was rationalized by arguing that that nonlinear activation loses information in lower-dimensional spaces, which is problematic when the number of channels is already small. === V3 === MobileNetV3 was published in 2019. The publication included MobileNetV3-Small, MobileNetV3-Large, and MobileNetEdgeTPU (optimized for Pixel 4). They were found by a form of neural architecture search (NAS) that takes mobile latency into account, to achieve good trade-off between accuracy and latency. It used piecewise-linear approximations of swish and sigmoid activation functions (which they called "h-swish" and "h-sigmoid"), squeeze-and-excitation modules, and the inverted bottlenecks of MobileNetV2. === V4 === MobileNetV4 was published in September 2024. The publication included a large number of architectures found by NAS. Inspired by Vision Transformers, the V4 series included multi-query attention. It also unified both inverted residual and inverted bottleneck from the V3 series with the "universal inverted bottleneck", which includes these two as special cases. === V5 === MobileNetV5's architecture was published shortly after the release of Gemma 3n in June 2025. While the announcement stated a technical report on MobileNetV5 would be available soon, this has not yet materialised. The network is 10 times larger than the largest V4 variant.
Data remanence
Data remanence is the residual representation of digital data that remains even after attempts have been made to remove or erase the data. This residue may result from data being left intact by a nominal file deletion operation, by reformatting of storage media that does not remove data previously written to the media, or through physical properties of the storage media that allow previously written data to be recovered. Data remanence may make inadvertent disclosure of sensitive information possible should the storage media be released into an uncontrolled environment (e.g., thrown in refuse containers or lost). Various techniques have been developed to counter data remanence. These techniques are classified as clearing, purging/sanitizing, or destruction. Specific methods include overwriting, degaussing, encryption, and media destruction. Effective application of countermeasures can be complicated by several factors, including media that are inaccessible, media that cannot effectively be erased, advanced storage systems that maintain histories of data throughout the data's life cycle, and persistence of data in memory that is typically considered volatile. Several standards exist for the secure removal of data and the elimination of data remanence. == Causes == Many operating systems, file managers, and other software provide a facility where a file is not immediately deleted when the user requests that action. Instead, the file is moved to a holding area (i.e. the "trash"), making it easy for the user to undo a mistake. Similarly, many software products automatically create backup copies of files that are being edited, to allow the user to restore the original version, or to recover from a possible crash (autosave feature). Even when an explicit deleted file retention facility is not provided or when the user does not use it, operating systems do not actually remove the contents of a file when it is deleted unless they are aware that explicit erasure commands are required, like on a solid-state drive. (In such cases, the operating system will issue the Serial ATA TRIM command or the SCSI UNMAP command to let the drive know to no longer maintain the deleted data.) Instead, they simply remove the file's entry from the file system directory because this requires less work and is therefore faster, and the contents of the file—the actual data—remain on the storage medium. The data will remain there until the operating system reuses the space for new data. In some systems, enough filesystem metadata are also left behind to enable easy undeletion by commonly available utility software. Even when undelete has become impossible, the data, until it has been overwritten, can be read by software that reads disk sectors directly. Computer forensics often employs such software. Likewise, reformatting, repartitioning, or reimaging a system is unlikely to write to every area of the disk, though all will cause the disk to appear empty or, in the case of reimaging, empty except for the files present in the image, to most software. Finally, even when the storage media is overwritten, physical properties of the media may permit recovery of the previous contents. In most cases however, this recovery is not possible by just reading from the storage device in the usual way, but requires using laboratory techniques such as disassembling the device and directly accessing/reading from its components. § Complications below gives further explanations for causes of data remanence. == Countermeasures == There are three levels commonly recognized for eliminating remnant data: === Clearing === Clearing is the removal of sensitive data from storage devices in such a way that there is assurance that the data may not be reconstructed using normal system functions or software file/data recovery utilities. The data may still be recoverable, but not without special laboratory techniques. Clearing is typically an administrative protection against accidental disclosure within an organization. For example, before a hard drive is re-used within an organization, its contents may be cleared to prevent their accidental disclosure to the next user. === Purging === Purging or sanitizing is the physical rewrite of sensitive data from a system or storage device done with the specific intent of rendering the data unrecoverable at a later time. Purging, proportional to the sensitivity of the data, is generally done before releasing media beyond control, such as before discarding old media, or moving media to a computer with different security requirements. === Destruction === The storage media is made unusable for conventional equipment. Effectiveness of destroying the media varies by medium and method. Depending on recording density of the media, and/or the destruction technique, this may leave data recoverable by laboratory methods. Conversely, destruction using appropriate techniques is the most secure method of preventing retrieval. == Specific methods == === Overwriting === A common method used to counter data remanence is to overwrite the storage media with new data. This is often called wiping or shredding a disk or file, by analogy to common methods of destroying print media, although the mechanism bears no similarity to these. Because such a method can often be implemented in software alone, and may be able to selectively target only part of the media, it is a popular, low-cost option for some applications. Overwriting is generally an acceptable method of clearing, as long as the media is writable and not damaged. The simplest overwrite technique writes the same data everywhere—often just a pattern of all zeros. At a minimum, this will prevent the data from being retrieved simply by reading from the media again using standard system functions. The UEFI in modern machines may offer an ATA class disk erase function as well. The ATA-6 standard governs secure erases specifications. Bitlocker is whole disk encryption and illegible without the key. Writing a fresh GPT allows a new file system to be established. Blocks will set empty but LBA read is illegible. New data will be unaffected and work fine. In an attempt to counter more advanced data recovery techniques, specific overwrite patterns and multiple passes have often been prescribed. These may be generic patterns intended to eradicate any trace signatures; an example is the seven-pass pattern 0xF6, 0x00, 0xFF,
Z-order
Z-order is an ordering of overlapping two-dimensional objects, such as windows in a stacking window manager, shapes in a vector graphics editor, or objects in a 3D application. One of the features of a typical GUI is that windows may overlap, so that one window hides part or all of another. When two windows overlap, their Z-order determines which one appears on top of the other. == Definition == The term "Z-order" refers to the order of objects along the Z-axis. In coordinate geometry, X typically refers to the horizontal axis (left to right), Y to the vertical axis (up and down), and Z refers to the axis perpendicular to the other two (forward or backward). One can think of the windows in a GUI as a series of planes parallel to the surface of the monitor. The windows are therefore stacked along the Z-axis, and the Z-order information thus specifies the front-to-back ordering of the windows on the screen. An analogy would be some sheets of paper scattered on top of a table, each sheet being a window, the table your computer screen, and the top sheet having the highest Z value. == Use == Typically, users of a GUI can affect the Z-order by selecting a window to be brought to the foreground (that is, "above" or "in front of" all the other windows). Some window managers allow interaction with windows while they are not in the foreground, while others will bring a window to the front whenever it receives input from the user. It is also possible for special windows to be designated "always on top"; these are then fixed to the top of the Z-order so that (with few exceptions) no other window can overlap them. When dealing with visual objects on a computer screen, an object with a Z-order of 1 would be visually "underneath" an object with a Z-order of 2 or greater. This is the same as making "layers" of objects where the Z-order determines what object is on top of another. An HTML page can use CSS to specify the Z-order so that some objects can be layered over others. Z-ordering is also used in 3D applications to determine object visibility based on overlap from other objects. This confers a speed advantage to the user as the computer does not need to render unseen objects. In practice, of course, some objects may be only partially obscured, and this is a complication that must be taken into account. In early real-time 3D graphics, Z-order was applied on a per-polygon basis to avoid using Z-buffer, which was considered expensive at the time. In modern 3D graphics, Z-order is used for order-dependent rendering, for example with semi-transparent objects. It can also be used to reduce the problem of Z-fighting, by either rendering farther objects first and then using weak inequality as the depth test or, conversely, rendering front-to-back and using strict inequality. == z-index == The actual number assigned to a particular place in the Z-order is sometimes known as the z-index. In particular the CSS property that sets the stack order of specific elements is known as the z-index. An element with greater stack order is always in front of another element with lower stack order. Negative values can also be used in the same manner. A negative value will appear behind a positive one. z-index only works on elements that have a position value (e.g. position: relative;) and for many coders, this one of the first things to investigate when debugging why the z-index isn't working. Like all other CSS properties, it can be set with JavaScript, with the following syntax:
Halloween Problem
In computing, the Halloween Problem refers to a phenomenon in databases in which an update operation causes a change in the physical location of a row, potentially allowing the row to be visited again later in the same update operation. This could even cause an infinite loop in some cases where updates continually place the updated record ahead of the scan performing the update operation. The potential for this database error was first discovered by Don Chamberlin, Pat Selinger, and Morton Astrahan in the mid-1970s, on Halloween day, while working on query optimization. They wrote a SQL query supposed to give a ten percent raise to every employee who earned less than $25,000. This query would run successfully, with no errors, but when finished all the employees in the database earned at least $25,000, because it kept giving them a raise until they reached that level. The expectation was that the query would iterate over each of the employee records with a salary less than $25,000 precisely once. In fact, because even updated records were visible to the query execution engine and so continued to match the query's criteria, salary records were matching multiple times and each time being given a 10% raise until they were all greater than $25,000. Contrary to what some believe, the name is not descriptive of the nature of the problem but rather was given due to the day it was discovered on. As recounted by Don Chamberlin: Pat and Morton discovered this problem on Halloween... I remember they came into my office and said, "Chamberlin, look at this. We have to make sure that when the optimizer is making a plan for processing an update, it doesn't use an index that is based on the field that is being updated. How are we going to do that?" It happened to be on a Friday, and we said, "Listen, we are not going to be able to solve this problem this afternoon. Let's just give it a name. We'll call it the Halloween Problem and we'll work on it next week." And it turns out it has been called that ever since.
Visual descriptor
In computer vision, visual descriptors or image descriptors are descriptions of the visual features of the contents in images, videos, or algorithms or applications that produce such descriptions. They describe elementary characteristics such as the shape, the color, the texture or the motion, among others. == Introduction == As a result of the new communication technologies and the massive use of Internet in our society, the amount of audio-visual information available in digital format is increasing considerably. Therefore, it has been necessary to design some systems that allow us to describe the content of several types of multimedia information in order to search and classify them. The audio-visual descriptors are in charge of the contents description. These descriptors have a good knowledge of the objects and events found in a video, image or audio and they allow the quick and efficient searches of the audio-visual content. This system can be compared to the search engines for textual contents. Although it is relatively easy to find text with a computer, it is much more difficult to find concrete audio and video parts. For instance, imagine somebody searching a scene of a happy person. The happiness is a feeling and it is not evident its shape, color and texture description in images. The description of the audio-visual content is not a superficial task and it is essential for the effective use of this type of archives. The standardization system that deals with audio-visual descriptors is the MPEG-7 (Motion Picture Expert Group - 7). == Types == Descriptors are the first step to find out the connection between pixels contained in a digital image and what humans recall after having observed an image or a group of images after some minutes. Visual descriptors are divided in two main groups: General information descriptors: contain low level descriptors which give a description about color, shape, regions, textures and motion. Specific domain information descriptors: give information about objects and events in the scene. A concrete example would be face recognition. === General information descriptors === General information descriptors consist of a set of descriptors that covers different basic and elementary features like: color, texture, shape, motion, location and others. This description is automatically generated by means of signal processing. ==== Color ==== It's the most basic quality of visual content. Five tools are defined to describe color. The three first tools represent the color distribution and the last ones describe the color relation between sequences or group of images: Dominant color descriptor (DCD) Scalable color descriptor (SCD) Color structure descriptor (CSD) Color layout descriptor (CLD) Group of frame (GoF) or group-of-pictures (GoP) ==== Texture ==== It's an important quality in order to describe an image. The texture descriptors characterize image textures or regions. They observe the region homogeneity and the histograms of these region borders. The set of descriptors is formed by: Homogeneous texture descriptor (HTD) Texture browsing descriptor (TBD) Edge histogram descriptor (EHD) ==== Shape ==== It contains important semantic information due to human's ability to recognize objects through their shape. However, this information can only be extracted by means of a segmentation similar to the one that the human visual system implements. Nowadays, such a segmentation system is not available yet, however there exists a serial of algorithms which are considered to be a good approximation. These descriptors describe regions, contours and shapes for 2D images and for 3D volumes. The shape descriptors are the following ones: Region-based shape descriptor (RSD) Contour-based shape descriptor (CSD) 3-D shape descriptor (3-D SD) ==== Motion ==== It's defined by four different descriptors which describe motion in video sequence. Motion is related to the objects motion in the sequence and to the camera motion. This last information is provided by the capture device, whereas the rest is implemented by means of image processing. The descriptor set is the following one: Motion activity descriptor (MAD) Camera motion descriptor (CMD) Motion trajectory descriptor (MTD) Warping and parametric motion descriptor (WMD and PMD) ==== Location ==== Elements location in the image is used to describe elements in the spatial domain. In addition, elements can also be located in the temporal domain: Region locator descriptor (RLD) Spatio temporal locator descriptor (STLD) === Specific domain information descriptors === These descriptors, which give information about objects and events in the scene, are not easily extractable, even more when the extraction is to be automatically done. Nevertheless, they can be manually processed. As mentioned before, face recognition is a concrete example of an application that tries to automatically obtain this information. == Descriptors applications == Among all applications, the most important ones are: Multimedia documents search engines and classifiers. Digital library: visual descriptors allow a very detailed and concrete search of any video or image by means of different search parameters. For instance, the search of films where a known actor appears, the search of videos containing the Everest mountain, etc. Personalized electronic news service. Possibility of an automatic connection to a TV channel broadcasting a soccer match, for example, whenever a player approaches the goal area. Control and filtering of concrete audiovisual content, like violent or pornographic material. Also, authorization for some multimedia content.
Open-source software security
Open-source software security is the measure of assurance or guarantee in the freedom from danger and risk inherent to an open-source software system. == Implementation debate == === Benefits === Proprietary software forces the user to accept the level of security that the software vendor is willing to deliver and to accept the rate that patches and updates are released. It is assumed that any compiler that is used creates code that can be trusted, but it has been demonstrated by Ken Thompson that a compiler can be subverted using a compiler backdoor to create faulty executables that are unwittingly produced by a well-intentioned developer. With access to the source code for the compiler, the developer has at least the ability to discover if there is any mal-intention. Kerckhoffs' principle is based on the idea that an enemy can steal a secure military system and not be able to compromise the information. His ideas were the basis for many modern security practices, and followed that security through obscurity is a bad practice. === Drawbacks === Simply making source code available does not guarantee review. An example of this occurring is when Marcus Ranum, an expert on security system design and implementation, released his first public firewall toolkit. At one time, there were over 2,000 sites using his toolkit, but only 10 people gave him any feedback or patches. Having a large amount of eyes reviewing code can "lull a user into a false sense of security". Having many users look at source code does not guarantee that security flaws will be found and fixed. == Metrics and models == There are a variety of models and metrics to measure the security of a system. These are a few methods that can be used to measure the security of software systems. === Number of days between vulnerabilities === It is argued that a system is most vulnerable after a potential vulnerability is discovered, but before a patch is created. By measuring the number of days between the vulnerability and when the vulnerability is fixed, a basis can be determined on the security of the system. There are a few caveats to such an approach: not every vulnerability is equally bad, and fixing a lot of bugs quickly might not be better than only finding a few and taking a little bit longer to fix them, taking into account the operating system, or the effectiveness of the fix. === Poisson process === The Poisson process can be used to measure the rates at which different people find security flaws between open and closed source software. The process can be broken down by the number of volunteers Nv and paid reviewers Np. The rates at which volunteers find a flaw is measured by λv and the rate that paid reviewers find a flaw is measured by λp. The expected time that a volunteer group is expected to find a flaw is 1/(Nv λv) and the expected time that a paid group is expected to find a flaw is 1/(Np λp). === Morningstar model === By comparing a large variety of open source and closed source projects a star system could be used to analyze the security of the project similar to how Morningstar, Inc. rates mutual funds. With a large enough data set, statistics could be used to measure the overall effectiveness of one group over the other. An example of such as system is as follows: 1 Star: Many security vulnerabilities. 2 Stars: Reliability issues. 3 Stars: Follows best security practices. 4 Stars: Documented secure development process. 5 Stars: Passed independent security review. === Coverity scan === Coverity in collaboration with Stanford University has established a new baseline for open-source quality and security. The development is being completed through a contract with the Department of Homeland Security. They are utilizing innovations in automated defect detection to identify critical types of bugs found in software. The level of quality and security is measured in rungs. Rungs do not have a definitive meaning, and can change as Coverity releases new tools. Rungs are based on the progress of fixing issues found by the Coverity Analysis results and the degree of collaboration with Coverity. They start with Rung 0 and currently go up to Rung 2. Rung 0 The project has been analyzed by Coverity's Scan infrastructure, but no representatives from the open-source software have come forward for the results. Rung 1 At rung 1, there is collaboration between Coverity and the development team. The software is analyzed with a subset of the scanning features to prevent the development team from being overwhelmed. Rung 2 There are 11 projects that have been analyzed and upgraded to the status of Rung 2 by reaching zero defects in the first year of the scan. These projects include: AMANDA, ntp, OpenPAM, OpenVPN, Overdose, Perl, PHP, Postfix, Python, Samba, and Tcl.